In this blog let us provide you a most needed information about all in one embedded solution device offering by the Terasic. Terasic is the leading developer and provider for FPGA-based hardware for networking & video processing to cost-friendly educational & development kits widely used by today’s college education and worldwide research institutes.
Curious to know much about this product..! Then without wasting time let us tell you much about the VEEK-MT2S.
What is this VEEK-MT2S?
The VEEK-MT2S features a DE10-Standard development board targeting Intel Cyclone® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which supports 5-point multi-touch and gestures. The all-in-one embedded solution offered on the VEEK-MT2S, in combination with LCD touch panel and digital image module, provides developers the ideal platform for multimedia applications with unparalleled processing performance. Developers can benefit from the use of FPGA-based embedded processing system utilizing mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA. The VEEK-MT2S Development Kit is a comprehensive embedded design environment with everything developers need to create processing-based systems. The VEEK-MT2S delivers an integrated platform including hardware, design tools, and reference designs for developing embedded software and hardware platforms in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application.
As the features says Combination of DE10-Standard Development Board and LCD module Makes the VEEK-MT2S. Then know about DE10-Standard Development Board and its technical specification.
Cyclone V SX SoC—5CSXFC6D6F31C6N
- Dual-core ARM Cortex-A9 (HPS)
- 110K programmable logic elements
- 5,761 Kbits embedded memory
- 6 fractional PLLs
- 2 hard memory controllers
Configuration Sources
- Serial configuration device – EPCS128 for the FPGA
- On-board USB Blaster II (normal type B USB connector)
Memory Device
- 64MB (32Mx16) SDRAM for the FPGA
- 1GB (2x256MBx16) DDR3 SDRAM for the HPS
- microSD card socket for the HPS
Peripherals
- Two USB 2.0 Host Ports (ULPI interface with USB type A connector) on HPS
- UART to USB (USB Mini B connector)
- 10/100/1000 Ethernet
- PS/2 mouse/keyboard
- IR emitter/receiver
- I2C multiplexer
Connectors
- One HSMC expansion header (used for MTLC2)
- One 40-pin expansion header
- One 10-pin ADC input header
- One LTC connector (one Serial Peripheral Interface (SPI) master ,one I2C bus, and one GPIO interface)
Display
- 24-bit VGA DAC
- 128×64 dots LCD Module with Backlight on HPS
Audio
- 24-bit CODEC, Line-in, line-out, and microphone-in jacks
Video Input
- TV decoder (NTSC/PAL/SECAM) and Video-in connector
ADC
- Sample rate: 500 KSPS
- Channel number: 8
- Resolution: 12 bits
- Analog input range : 0 ~ 4.096 V
Capacitive Multi-touch Screen Module
LCD Display
- 7-inch TFT LCD with pixel resolution of 800*480
- 16 million colors (8-bit RGB)
- LED backlight
Capacitive Multi-Touch
- Five points multi-touch
- I2C interface
- Gesture supporting
Before concluding the blog let me provide little information about how we are related to this product,
As you all know Tenet addresses the needs of large multinationals, governments, defense, educational, research institutions, artists and hobbyists in various domains inclusive of but not limited to physical computing, automotive, electronics, embedded systems, sensor networks and many more.
In this abiding endeavor of keeping our customers happy in bringing the new products, Tenet Technetronics is more than happy to set up an Authorized Distribution Alliance with Terasic and promote as well as distribute the Terasic products in India
Continued with this, there are a lot of activities (Workshops/Videos/Application notes) please stay tuned with our YouTube channel as well as blogs to learn more. (Website: https://www.tenettech.com/browse/FPGA)
For any further assistance, please feel free to contact us at info@tenettech.com and we would be more than happy to help.
