UEXT interface is a popular interface formed by the olimex team and there are a lot of exciting hardware peripheral/application boards that hold a common communication channel called the UEXT. Now one can harness the strengths of these modules with the adaptor boards available for raspberry pi. So ideally you could connect any of the UEXT modules and get it to work with the Pi.
Mentioned below are some popular UEXT modules and links to the landing pages for these products .
FEATURES
- Raspberry Pi interface connector
- female UEXT connector = SPI + I2C + UART
- 7 GPIO signals available on male header
- SMD jumpers provided for swap of both chip enable
- Designed with breadboarding spacing in mind
- Dimensions: 60 x 53/10 mm (23.7 x 2.1/0.4″)
For detailed information on the products please click on the following links
- RPI-UEXT: http://tenettech.com/product/2597/rpi-uext
- LCD module: http://tenettech.com/product/2708/mod-lcd3310
- Relay module: http://tenettech.com/product/2619/mod-io
- Bluetooth module: http://tenettech.com/product/2648/mod-bt
- Zigbee module: http://tenettech.com/product/2658/mod-zigbee
- GSM/GPRS module: http://tenettech.com/product/2649/mod-gsm
- WiFi module: http://tenettech.com/product/2656/mod-wifi-rtl8188
- Accelerometer: http://tenettech.com/product/2603/mod-smb380
- Magnetometer: http://tenettech.com/product/2600/mod-mag
- GPS module: http://tenettech.com/category/304/gps
