Given the huge demand that we have for the beaglebone , we managed to get a shipment...
Year: 2011
This is an exciting post for me to write especially because its a great combination of open...
We are proud to announce that we are now authorized to distribute Digilent Inc’s products in India....
Arduino Uno (Revision 3) is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital...
The end of Year sale preparatory work is on full swing and we are on schedule to...
With this year Tenet marks the completion of 4 years and we are highly excited towards the...
All these years at Tenet we have been learning a lot of stuff and the team has...
It was a great experience this time to be contributing to an article on the EFY magazine...
We recently received a shipment of 25 boards and within no time we had them all shipped...
We received an initial shipment of beaglebone this week and its amazing to see the way orders...
TI launchpad is an inexpensive low cost micro controller development board for begin learning embedded programming as...
As mentioned earlier in our blogs, we have been authorized by embedded artists to distribute their products...
recently we held a custom designed workshop for one of the client icfoss which happens to be...
In the continuing effort to make basic electronics more simple we have new videos to the existing...
We were happy to showcase as well as demonstrate the beagleboard as well as pandaboard at the...
It was a great experience for our application engineers to be part of this event and be...
Its a short notice but we are pretty much excited to support the arowboat.org team at...
In the recent past we have seen a lot of enquiries from our customers wanting us...
Tenet LCD booster pack for TI MSP , a set on Flickr. Given the lowest cost of...
This week’s " back to basics " series of videos mainly talks about the most commonly encountered "Current...
Continuing the legacy of the Beagleboard XM the beagleboard.org now has come up with a low...
Videos have been a great way to share things and its been one of our main focus...
Tenet has remained more a supplier company in the past and we have had customers who...
It has always been our mission to "Simplify technology for Life " and in this regard we...
In the view of preparing for our workshops based on the TI MSP . Here are...
As posted in our blogs earlier we are now ready with the workshop module for the TI...
Couple of our customers want to catch up on the beagleboard XM workshops and we setup a...
Last week around we had a workshop sessions for the beagleboard XM and it was well...
We have finalized the dates for the Beagleboard XM 101 workshop and the first one is happening...
We have been working on providing a basic robotic workshop and here we are with the...
This week around we tore apart some of the IR sensor breakouts that we currently hold on...
We have a workshop session planned centered around the MSP launchpad and we have been involved in...
Our Engineers have been experimenting with the VRBot module and this has been an exciting tool to...
This is one of the recent demos that we had showcased the students at a workshop session...
We have slowly got more momentum on the pandaboard and here is a video that showcases the...
Last week around we had a chance to explore the features of the GPIOs while we were...
One of the exciting things about our workshops is that we not only get to meet...
Seeing the amount of queries that our customers are writing up to our team it clearly showcases...
One of the active work that our university program team at Tenet has been doing is conducting...
Its time for now to see how GingerBread distrubution runs on the Beagleboard XM and here is...
A couple of months ago we got to play with the load cell breakout and here is...
One of the things that we have been always asked for by customers is a way to...
TFT touchscreen LCDs have been a common sight in todays embedded systems and its no exception with...
During the last couple of months people here at Tenet have been working on improving the user...
Developers at Tenet love working on the Arduino platform and we always wait for a reason to...
This time around we tried out various options to design simple GUIs using scripting languages on the...
One of the common questions from our customers has been the way the QT works on the...
Last weekend we had a PCB design workshop at Tenet which showcased various aspects of designing a...
Tenet Technetronics is now an official distributor for the Pandaboards . It is early days that we...
It has always been fun to explore a right mix of software and hardware to illustrate how...
The Workshop is basically a 1 day event. In contrast to the workshop, the intention was to cover...
This week around I planned to write something non-technical and here is my post talking about the...
We showcased few breakouts (switch breakout, blinky breakout, LCD breakout for Arduino/Comet) video demonstration in one our...
This is the video demonstration of EasyVR – Voice Recognition Module with Arduino. Here is the code:...
This time around Mr. Pandi showcases the Tenet Motor shield and also explains the organization of the...
Arduino workshop is conducted on all weeknds at Tenet. You could look at the syallabi as well...
As many queries come from our customer saying what is Arduino?. our Product Engineer, has designed the Arduino...
This week around developers at Tenet set out with a task to get the Ubuntu up and...
We had a chance this time to showcase the beagleboard XM this time at the ESC event...
As posted earlier on one of our blogs earlier, Tenet recently launched the LED matrix display and here...
In the past couple of weeks our Application Engineer, Mr Mithun is showcasing some of his initial...
We put up an application note in one of our previous post on interfacing the Arduino to...
LEDs are always fun to play with and this post shows another LED project that is built...
Soon after google announced the availability of the USB accessory support in the IO conference this year,...
Talking to Arduino over a serial interface is straight forward in Python by using pyserial wrapper.Here we...
This week around we have the screen recording for porting the QEMU emulator for beagleboard ! Unfortunately...
Touch Sensors are a common sight today in most of the embedded systems. This video demonstrates the...
After a long break we are bringing back the hands on Arduino Workshop session back at Tenet....
Following some of our successful launches of the quad this time around Tenet Technetronics mentored a set...
A lot of buzz is around after the announcement from google stating the support for the Accessory...
We have seen a lot of traction in the last couple of weeks for the TI MSP...
Of late we realized that our youtube channel has been receiveing a lot of traction and we...
Through this video demo we have explained the solution to problems that many are facing in porting...
As communicated through our blogs earlier ! Here a few set of products that are tested and...
As in the past we have not been secretive on our consulting offerings ! We at Tenet...
As mentioned on one of our earlier posts regarding the Indian made products, here we are presenting...
A common problem faced today by all individuals has been the lack of time to manage a...
Over the last decade the use of microcontrollers to build embedded systems has been ever increasing and...
A lot of our customers wanted to know how the android perfoms on a beagleboard XM and...
As stated earlier in the blog there are a lot of new products that we plan to...
Over the last couple of years since the start of the robotics projects that we executed we...
Its a common request that we find from workshop attendees asking us to make a video tutorial...
We now feature the TFT LCD screens that are compatible with the beagleboard XM. Once can order...
It was indeed immense pleasure to have had a chance to meet David (C0-Founder of Arduino) at...
BeagleBoard XM’s comes with a console version of the angstrom and a lot of our customers wanted...
This is the time of the year we at Tenet start planning for the development teams and...
An other workshop event and a whole lot of learning ! This time around it was at...
After a long break we are bringing back the hands on Arduino Workshop session back at Tenet....
All the BeagleBoard XM bought through Tenet Technetronics will ship with a beaglesafe acrylic case from April...
Over a period of time our development team has built a lot of customer projects involving various...
Its been a crazy time for all of us at Tenet over the last 3 days. This...
Now that we have teh beagleboards in stock the most common questions that we have been flooded...
With the last post clearly showing the way various peripherals are connected to the beagleboard , we...
A common question that we get flooded with repect to the beagleboards have been > What peripherals...
Yet another day of learning and fun seeing students play with electronics ! We were amazed to...
As stated earlier we know have the comets being run through the pick and place machine to...
We at Tenet always had fun and a lot of learning when we guide students to build...
A long wait for the beagleboards is now over ! We have now planned to stock enough...
We have been trying to talk to various companies that make DSP development tools over the last...
